RM/RMD Series Reach Truck

Elevate Your Expectations

By harnessing technology and engineering advancements, Crown has redefined the reach truck. With Crown’s exclusive MonoLift Mast, this lift truck delivers unprecedented height – up to 12,825 mm – along with superior visibility, greater capacity at height, game-changing speed/efficiency, and enviable operator comfort.

Operator transports a load on the RM/RMD narrow-aisle reach truck

Standout Results     

The Crown RM/RMD Series narrow-aisle reach truck offers unmatched, all-around visibility – at height, eye and ground levels, and in all directions around the operator.

Operator utilising the the RM/RMD sit-down reach truck increased visibility to transport loads.
RM/RMD Reach Truck MonoLift Mast

Opportunities in Reach

With game-changing height, greater capacity and a smaller footprint, you can make the most of every square foot.

Extended loads put tremendous pressure on masts. Crown addresses this challenge with a patented, boxed-in cross section mast, which significantly reduces twisting and flexing, associated with conventional, dual upright masts.

Capacity is often the compromise in deep reach applications. The RM/RMD Series reach forklift offers optimised weight distribution and stable MonoLift Mast for superior capacity without a wider wheelbase.

Set New Standards    

The RM/RMD Series reach truck from Crown boasts incredible travel, lift and lower speeds that equate to reduced cycle times and measurable productivity gains.

Crown’s X-press Lower technology increases top lowering speed 33 metres per minute to 73 metres per minute while using no additional energy. With twice the speed and no additional downtime for charging, the RM/RMD Series delivers a boost in throughput.  

Operator traveling on an RM/RMD Series stand-up reach lift truck
RM/RMD reach truck operator compartment with sit-down or stand-up options

The RM Series Reach Truck Offers Comfort, Confidence and Control        

Ergonomic excellence ensures operator comfort, safety and productivity, even in the most challenging environments.

Crown’s exclusive OnTrac Anti-Slip Traction Control system greatly reduces tyre spin during acceleration, plugging and braking for optimised performance – even on wet, slick or dusty surfaces.

RM/RMD Series Model Types

Stand-up Single Reach Truck
RM 6000 Single Reach Truck

The RM Series is a stand-up reach truck that features a MonoLift mast. It can handle a variety of load sizes and stack in aisles as narrow as 2.4 metres.

Download Specifications    Download Brochure

 

  • Load Capacity

    2000 kg

  • Power (Electric)

    36 volt

  • Head Length

    1423 - 1534 mm

  • Max Lift Height

    12825 mm

Stand-up Deep Reach Truck
RMD 6000 Double Reach Truck

The RMD Series is the only narrow-aisle stand-up reach truck with a MonoLift mast. The forks extend to allow the truck to deposit or retrieve pallets that are positioned in the rack two deep.

Download Specifications    Download Brochure

 

  • Load Capacity

    1450 kg

  • Power (Electric)

    36 volt

  • Head Length

    1547 - 1658 mm

  • Max Lift Height

    12825 mm

RM Sit-Down Single Reach Truck
RM 6000S Sit-Down Single Reach Truck

A large floor surface and adjustable seat make the RM an "S" class series. This sit-down reach truck allows operators to sit, stand or lean comfortably.

Download Specifications    Download Brochure

 

  • Load Capacity

    2000 kg

  • Power (Electric)

    36 volt

  • Head Length

    1585 - 1673 mm

  • Max Lift Height

    12825 mm

RMD Sit-Down Deep Reach Truck
RMD 6000S Sit-Down Double Reach Truck

The RMD Series is an "S" class rider deep reach truck with MonoLift mast. The large floor surface and seat make the "S" class task-friendly, comfortable and productive.

Download Specifications    Download Brochure

 

  • Load Capacity

    1450 kg

  • Power (Electric)

    36 volt

  • Head Length

    1709 - 1798 mm

  • Max Lift Height

    12825 mm

Key Options and Accessories

Xpress Lower enables the operator to more than double traditional lowering speeds, saving time and boosting productivity.

Reach forklift Xpress lower option

The camera and colour monitor offer a detailed view of the forks for improved pallet entry, visibility and productivity.

Reach Truck camera and colour monitor

The laser fork guide enables the operator to easily position the forks at height for increased precision, productivity and safety.

Reach forklift laser fork guide

The quick change load wheel assembly utilises a patented design that enables technicians to replace wheels in 2.5 minutes compared to 30-40 minutes for traditional replacements.

RM/RMD series forklift quick change load wheels

Work Assist Accessories are designed to make the operator's job faster, easier and more productive.

RM/RMD reach truck work assist accessories
Reach forklift Xpress lower option