RM/RMD Series

Elevate Your Expectations      

By harnessing technology and engineering advancements, Crown has redefined the reach truck. With Crown’s exclusive MonoLift Mast, this lift truck delivers unprecedented height – up to 12,825 mm – along with superior visibility, greater capacity at height, game-changing speed/efficiency, and enviable operator comfort.

Operator transports a load on the RM/RMD rider reach truck

Standout Results     

The Crown RM/RMD Series offers unmatched, all-around visibility – at height, eye and ground levels, and in all directions around the operator.

Operator utilising the the RM/RMD series increased visibility to transport loads.
Up-close view of Crown's MonoLift Mast

Opportunities in Reach   

With game-changing height, greater capacity and a smaller footprint, you can make the most of every square foot. 

Extended loads put tremendous pressure on masts. Crown addresses this challenge with patented, boxed-in cross section mast, which significantly reduces twisting and flexing, associated with conventional, dual upright masts.

Capacity is often the compromise in deep reach applications. The RM/RMD Series offers optimised weight distribution and stable MonoLift Mast for superior capacity without a wider wheelbase.

Set New Standards    

The RM/RMD Series from Crown boasts incredible travel, lift and lower speeds that equate to reduced cycle times and measurable productivity gains.

Crown’s X-press Lower technology increases top lowering speed 33 meters per minute to 73 meters per minute while using no additional energy. With twice the speed and no additional downtime for charging, the RM/RMD Series delivers a boost in throughput.   

Operator traveling on an RM/RMD Series rider reach lift truck
View of the RM/RMD series from the back.

Comfort, Confidence and Control        

Ergonomic excellence ensures operator comfort, safety and productivity, even in the most challenging environments.

Crown’s exclusive OnTrac Anti-Slip Traction Control system greatly reduces tire spin during acceleration, plugging and braking for optimised performance – even on wet, slick or dusty surfaces.

RM/RMD Series Model Types

rider reach truck
Single Reach (RM)

The RM Series is a rider reach truck that features a MonoLift mast. It can handle a variety of load sizes and stack in aisles as narrow as 2.4 meters.

  • Load Capacity

    2,000 kg

  • Power (Electric)

    36 volt

  • Head Length

    1,423 - 1,534 mm

  • Max Lift Height

    10,160 mm

narrow-aisle rider reach truck
Double Reach (RMD)

The RMD Series is the only narrow-aisle rider reach truck with a MonoLift mast. The forks extend to allow the truck to deposit or retrieve pallets that are positioned in the rack two deep.

  • Load Capacity

    1,450 kg

  • Power (Electric)

    36 volt

  • Head Length

    1,547 - 1,658 mm

  • Max Lift Height

    10,160 mm

sit-down reach truck
Single Reach Sit-Down (RM)

A large floor surface and adjustable seat make the RM an "S" class series. This sit-down reach truck allows operators to sit, stand or lean comfortably.

  • Load Capacity

    2,000 kg

  • Power (Electric)

    36 volt

  • Head Length

    1,585 - 1,673 mm

  • Max Lift Height

    12,825 mm

rider deep reach truck with MonoLift mast
Double Reach Sit-Down (RMD)

The RMD Series is an "S" class rider deep reach truck with MonoLift mast. The large floor surface and seat make the "S" class task-friendly, comfortable and productive.

  • Load Capacity

    1,450 kg

  • Power (Electric)

    36 volt

  • Head Length

    1,709 - 1,798 mm

  • Max Lift Height

    12,825 mm

Key Options and Accessories

Xpress Lower enables the operator to more than double traditional lowering speeds, saving time and boosting productivity.

Reach forklift Xpress lower option

The capacity monitor shows the operator the approximate load weight and indicates to what height the load can be placed.

RM/RMD Series reach truck capacity monitor

The camera and colour monitor offer a detailed view of the forks for improved pallet entry, visibility and productivity.

Reach Truck camera and color monitor

The laser fork guide enables the operator to easily position the forks at height for increased precision, productivity and safety.

Reach forklift laser fork guide

The quick change load wheel assembly utilises a patented design that enables technicians to replace wheels in 2.5 minutes compared to 30-40 minutes for traditional replacements.

RM/RMD series forklift quick change load wheels

Work Assist Accessories are designed to make the operator's job faster, easier and more productive.

RM/RMD reach truck work assist accessories
Reach forklift Xpress lower option